Miscellaneous Function Commands; Dle Enq N; Dle Dc4 Fn M T （Fn=1 - Tally Dascom DT-210 Programmer's Manual

Tally Dascom DT-210/230

4 Miscellaneous Function Commands

DLE ENQ n

[Function] Send real-time request to printer
[Format] ASCII
Hex
Decimal
[Range] n = 1, 2
[Description] Respond to a request in real-time from the host computer.
n
1
2
[Note] • Use this command after removing the cause of the error.
• Take the following into consideration:
• If the received data includes a data string matching this command, the printer
performs the command. Users must consider this.
Example: Graphic data might accidentally include a data string matching this command.
• Do not embed this command within another command.
Example: Graphic data might include this command.
DLE DC4 fn m t （fn=1）
[Function] Generate pulse in real-time
[Format] ASCII
Hex
Decimal
[Range] fn = 1
m = 0, 1
1 ≤ t≤ 8
[Description] Outputs the pulse specified by t in real-time to connector pin m.
• t specifies the pulse on time or off time as [t × 100 ms].
[Note]
• Take the following into consideration:
• If the received data includes a data string with this command, the printer performs the
DLE ENQ
10 05
16 5
Function
Recovers from a recoverable error and restarts printing from the line where the
error occurred.
• This command is ignored unless a recoverable error has occurred.
Recovers from a recoverable error after clearing the receive and print buffers.
• This command is ignored unless a recoverable error has occurred.
DLE DC4
10 14
16 20
m
0 Drawer kick-out connector pin 2.
1 Drawer kick-out connector pin 5.
n
n
n
fn m t
fn m t
fn m t
Connector pin
Programming Guide V1.1
- 15 -