Function 6> Gs ( E Pl Ph Fn A (Fn = 6); Function 11> Gs ( E Pl Ph Fn A D1 - Tally Dascom DT-210 Programmer's Manual

Tally Dascom DT-210/230
<Function 6> GS ( E pL pH fn a (fn = 6)
[Function] Transmit the customized setting values
[Format] ASCII
Hex
Decimal
[Range] (pL + pH × 256) = 2 (pL = 2, pH = 0)
fn = 6
a = 5, 6, 97, 116, 118
[Description] Transmits the customized value specified by a.
<Function 11> GS ( E pL pH fn a d1...dk (fn = 11)
[Function] Set the configuration item for the serial interface
[Format] ASCII
Hex
Decimal
[Range] 3≤(pL+ pH×256)≤65535 (0≤pL≤255, 0≤pH≤ 255)
fn = 11
a = 1
48 ≤ d ≤ 57
[Default] d1...dk = "38400" (upon shipment)
[Description] • Sets the configuration item for the serial interface specified by a to the values
specified by d.
• Transmission speed settings (a = 1)
[Note]
• The configuration item set by this function is enabled by executing GS ( E <Function 2>
or restarting the printer. Note that the host computer must be set to enable the
GS ( E
1D 28 45 pL pH fn a
29 40 69 pL pH fn a
a
5 Print density
6 Print speed
97 Number of division of thermal head energization
116 Print control (single-color or two-color)
118 Black-color density in two-color printing
GS (
1D 28
29 40
a Configuration item
1 Transmission speed
d1...dk
2400
4800
9600
19200
38400
57600
115200
pL pH fn a
Type of customized value
E pL pH fn a d1 ... dk
45 pL pH fn a d1 ... dk
69 pL pH fn a d1 ... dk
Transmission speed
2400 bps
4800 bps
9600 bps
19200 bps
38400 bps
57600 bps
115200 bps
Programming Guide V1.1
- 24 -