Remote Access; Access Enabled By Local Users - Mitel Aastra 470 System Manual

5. 4

Remote access

With a remote maintenance access the user is authenticated using his user name
and password. The user account must also be assigned an authorization profile in
which the interface access
applies to SRM (Secure IP Remote Management), secure IP remote management.
5. 4. 1

Access enabled by local users

Remote maintenance access can be enabled in three ways:
• Using function codes (see
• With WebAdmin
• With the System Assistant on the Office 45
It can be revoked again automatically or manually.
All enabling types have equal authorization status. This means that remote mainte-
nance access can be enabled using a function code for example, and then barred
again using the WebAdmin in general maintenance settings (
System Assistant on the Office 45.
When remote maintenance access is activated, the event message
nance on is sent to the local printer and to all the terminals registered in message
group 16.
Remote maintenance access can be enabled or barred using the function codes
both from the idle state and the talk state, e.g. after an enquiry.
The authorisation to activate or bar remote maintenance access using the function
code is defined and granted to the user with the parameter
access in a permission set (
After a first start of the communication server, the authorizations of all users are re-
stricted.
Note:
It is advisable not to keep the remote maintenance access permanently
activated. This ensures that the communication server data cannot be
manipulated from a remote location by unauthorized persons.
Aastra 470 as of R3.2
syd-0337/1.6 – R3.2 – 09.2014
Remote maintenance dial-up access
page 190)
=cb).
Configuration
is enabled. This also
=t0) or with the
Remote mainte-
Remote maintenance
189