Boot Menu; Display Of Event Messages; Status Leds On Ethernet Interfaces - Mitel Aastra 470 System Manual

Operation and Maintenance
6. 4. 3. 4

Boot menu

The boot menu is shown during the start-up phase 2 (LED pattern5 in
approx. 3 seconds. The boot menu allows the user to reset the IP address data or to
carry out a first start. The boot mode is exited automatically and the startup then
continues normally if no input is made within 3 seconds.
Fig. 88 Boot menu Aastra 470
6. 4. 3. 5

Display of event messages

If an event message occurs in normal operation, the LED pattern switches from
"slowly flashing green" to "slowly flashing orange-green" and the event message is
indicated on the colour display.
Tab. 93 Display of event messages in normal operation:
Pattern LED Duration
11 As long as the event message exists
O G
6. 4. 3. 6

Status LEDs on Ethernet interfaces

For explanations of the status LEDs on Ethernet interfaces see
page 161.
228
Meaning
Event message present
"Status LED",
syd-0337/1.6 – R3.2 – 09.2014
Tab. 90) for
Aastra 470 as of R3.2