Operation And Maintenance; Data Maintenance; What Data Is Stored Where - Mitel Aastra 470 System Manual

6

Operation and Maintenance

This chapter describes maintaining the system and configuration data as well
as updating the system software. Replacing cards, modules and terminals are
also described. The display and control panel of the communication server as
well as operations supervision using the event message concept, the operat-
ing state display, and the error display are also topics covered in this chapter.
6. 1

Data Maintenance

6. 1. 1

What data is stored where

The communication server's data storage system consists of different elements:
• In the Flash components are stored the system software, the boot software and
the configuration data. The contents of the memory are retained even when
there is no power supply.
• In the RAM components (main memory) are stored volatile data that cannot be
saved. It is available only when the system is in operation.
• The EIM card (Equipment Identification Module) contains the system-specific
data (system ID, system type, sales channel, licence code, generation, DECT iden-
tification numbers, IP address of the configuration server). The contents of the
memory are retained even when there is no power supply.
• The data of applications on the applications server (if an CPU2-S/CPU2 applica-
tions card is fitted) is stored on a hard disk.
Aastra 470 as of R3.2
syd-0337/1.6 – R3.2 – 09.2014
Operation and Maintenance
199