Boot Software; System-Specific Data; Updating Configuration Data - Mitel Aastra 470 System Manual

Functions for backing up and restoring configuration data and audio data are avail-
able in the WebAdmin view
backup", page 196).
Note:
Modifying or deleting files on the file system of the communication
server can result in a system that is no longer able to run.
6. 1. 1. 3

Boot software

The boot software is stored in a different Flash memory, which allows the commu-
nication server to start up in the boot mode, even if without executable system
software.
6. 1. 1. 4

System-specific data

The system-specific data (system ID, system type, sales channel, licence code, gen-
eration, DECT identification numbers, IP address of the communication server) is
stored on the EIM card (chip card). This data is not deleted by a first start of the PBX,
and remains available. It can be ported to a different communication server by re-
placing the EIM card.
6. 1. 2

Updating configuration data

There are system-wide, user-related and terminal-related configuration data:
• System-wide configuration data can only be modified with WebAdmin.
• Terminal configuration data such as key assignments or ringing melodies can be
modified either directly on the terminal, with Self Service Portal or with
WebAdmin. With some system phones configuration is also possible using the
web user interface or with the help of configuration files.
• User-related configuration data such as private contacts or CFUs is valid for all
the terminals assigned to the user and can be configured using WebAdmin,
partly via Self Service Portal, or directly on the terminal itself.
Access to the configuration data via WebAdmin is regulated by a User Access Con-
trol with user accounts, authorization profiles and authorization levels. More infor-
mation can be found in the Chapter
Aastra 470 as of R3.2
syd-0337/1.6 – R3.2 – 09.2014
Maintenance / Data backup
"User access control", page
Operation and Maintenance
( =um) (see also
184.
"Data
201