Update Software; System Software - Mitel Aastra 470 System Manual

Operation and Maintenance
6. 2

Update Software

6. 2. 1

System software

The communication server software is normally updated with WebAdmin. In ex-
ceptional cases (e.g. during downgrade), an Emergency Upload via System Search
is required.
The firmware for Aastra 5300/Aastra 5300ip, Aastra 610d/Aastra 600d phones,
DECT phone Office 135/135pro, DECT radio units SB-4+/SB-8/SB-8ANT and
WebAdmin is also available in the system software.
Tip
The communication server software version can be displayed as follows
on Aastra 5300/Aastra 5300ip phones:
1. Access the configuration menu Settings.
2. Long-click on the * key
Information can be retrieved on Aastra 6800i/Aastra 6700i SIP phones as
well as on Aastra 610d/Aastra 600d DECT phones via the menu.
Depending on the phone, additional information is displayed.
Providing the system software and licence code
The new system software and the relevant licence code are provided by your sales
dealer. In most cases you will download the software from an internet site specified
by your sales partner. You will also receive a voucher. With this you can generate
the new licence code through the Aastra Connect internet portal
nect.aastra.com and transmit it in your communication system. You need a login to
access Aastra Connect (user name and password).
Load new system software with WebAdmin
New system software can conveniently and safely be loaded on the communica-
tion server file system in the WebAdmin view
( =m7). The activation point of the new software is selectable. (Exception: The ac-
tivation time on the satellites AIN always depends on the master's demand).
In newly delivered systems it is possible to directly load new system software after
choosing the sales channel.
202
Maintenance / System software
http://www.con-
Aastra 470 as of R3.2
syd-0337/1.6 – R3.2 – 09.2014