Cabling Interfaces; Port Addressing - Mitel Aastra 470 System Manual

Installation
4. 7

Cabling interfaces

All the interfaces are routed to the front panel and are therefore accessible without
opening the communication server.
esc
WAN 1.1
LAN 1.2
LAN
Fig. 34 Interfaces on the front panel with port designation (example)
4. 7. 1

Port addressing

A port address is always of the type x.y. x is the number of the card slot, and y, the
port number.
The slot numbering starts with 1 and ends with 8 (see
slots", page 105).
With BRI-S interface and DSI interface addresses, the terminal selection digit (TSD)
is relevant, in addition to the slot and port numbers. This is always -1 in analogue
terminal interfaces.
Tab. 44 Examples of interface addressing
Slot
Call Manager card; FXS interface x.5
Interface card on slot 4; interface x.3
Terminal with TSD 2 on interface card in slot 6; interface x.4
116
LAN 1.3 FXS 1.5 FXS 1.7 1
LAN 1.4 FXS 1.6 FXS 1.8 2
1 3 5
2 4 6
1 3
2 4
7 1 3 5 7 9 -12
8 2 4 6 8 13-16
"Number of the Aastra 470
1 3 5 7
2 4 6 8
1-4 9 -12 17-20 25-28
5-8 13-16 21-24 29-32
Port address
1.5
4.3
6.4-2
Aastra 470 as of R3.2
syd-0337/1.6 – R3.2 – 09.2014