Single Gang Junction Box - Steelcase RoomWizard Installation Instructions Manual

Single Gang Junction Box

1. Route the PoE cable through the junction box
mounting plate.
2. Attach mounting plate directly to junction box using
two (2) screws provided.
3. Route the PoE cable through the wall mount
bracket and mount bracket to the junction box
mounting plate using the four (4) #6-32 screws and
four (4) #6-32 nuts.
4. Plug the PoE cable into the back of the
RoomWizard.
5. Attach RoomWizard to the wall mount bracket.
6. Peel or cut tabs on the protective cover, then slide
to remove the protective cover.
3
5
4
RoomWizard Mounting Kits
©
Installation Instructions
6
Peel or cut the tabs on
the protective cover
Page 19 of 20