Steelcase RoomWizard Installation Instructions Manual page 10

Privacy Wall (with 1" flange - continued)
7. Route the PoE cable through the glass mounting bracket
then peel backing film from the adhesive mounting strips
on the back of the glass mounting bracket. See Table 1
for correct exposed length.
8. Ensuring the glass mounting bracket is level and against
the PoE cable cover then press the glass mounting bracket
onto glass. Hold even pressure for at least 15 seconds.
9. Plug the PoE cable into the back of the RoomWizard.
10. Attach the RoomWizard to the glass mount bracket.
11. Peel or cut tabs on protective cover, then slide to remove
the protective cover.
9
7
10
RoomWizard
Installation Instructions
8
11
Peel or cut the tabs on the protective cover
Mounting Kits
©
REMOVE BACKING FILM
FROM ADHESIVE STRIPS
Page 10 of 20