Steelcase RoomWizard Installation Instructions Manual page 16

Wall Tilt Bracket
(continued)
4. Route the PoE cable through the square holes
in the wall tilt bracket and through the wall
mount bracket.
5. Insert four (4) screws though the holes in the
wall mount bracket and wall tilt bracket and
into the wall anchors. Ensuring mount
brackets are level, tighten screws.
6. Plug the PoE cable into the RoomWizard.
7. Attach the RoomWizard to the wall mount
bracket.
8. Peel or cut the tabs on the protective cover,
then slide to remove the protective cover.
6
Screws
Mount Bracket
7
RoomWizard Mounting Kits
©
Installation Instructions
4
5
Tilt Bracket
8
Peel or cut the tabs on
the protective cover
PoE CABLE
Page 16 of 20