Glass Tilt Bracket
(continued)
5. Install four (4) screws through the wall mount bracket and into
the tapped holes in the glass tilt bracket. Ensuring the wall
mount bracket is level, tighten screws with Phillips screwdriver.
6. Plug the PoE cable into the back of the RoomWizard.
7. Attach the RoomWizard to the wall mount bracket.
8. Peel or cut tabs on the protective cover, then slide to remove
the protective cover.
6
7
RoomWizard
Mounting Kits
©
Installation Instructions
SCREWS
5
8
Peel or cut the tabs on
the protective cover
Page 18 of 20