Advertisement
Quick Links
®
Si vous avez un problème, une question à poser ou
une requête à faire, appelez votre concessionnaire
local ou Steelcase, ligne 1, au numéro
888.STEELCASE (888.783.3522)
pour obtenir une action immédiate de personnes
prêtes à vous aider.
(En-dehors des États-Unis, du Canada, du Mexique,
de Porto Rico et des Antilles américaines, composez
le 1.616.247.2500)
Ou visitez notre site Web à l'adresse: www.steelcase.com
© 2021 Steelcase Inc.
Grand Rapids, MI 49501
Imprimé aux États-Unis
If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, PuertoRico,
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
2021 Steelcase Inc.
©
Grand Rapids, MI 49501
U.S.A.
Printed in U.S.A.
27"
MAX
11-28lbs
5-12.7kg
RATED
Si tiene algún problema, pregunta o pedido, Ilame
a su distribuidor local, o a la linea 1 de Steelcase al
888.STEELCASE (888.783.3522)
para una respuesta inmediata de parte de quienes
desean ayudarle.
(Fuera de los EE.UU., Canadá, México, Puerto Rico y las
Islas Vírgenes de sol EE.UU., Ilame al 1.616.247.2500)
2021 Steelcase Inc.
©
Grand Rapids, MI 49501
U.S.A.
Impreso en los EE.UU.
CFSTDDUALBAR
Page 1 of 12
P/N 1439128001
158043 Rev B
P516438 REV C
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Steelcase CFSTDDUALBAR
Summary of Contents for Steelcase CFSTDDUALBAR
- Page 1 Steelcase Line 1 at Si tiene algún problema, pregunta o pedido, Ilame 888.STEELCASE (888.783.3522) a su distribuidor local, o a la linea 1 de Steelcase al for immediate action by people who want to help you. 888.STEELCASE (888.783.3522) para una respuesta inmediata de parte de quienes (Outside the U.S.A., Canada, Mexico, PuertoRico,...
- Page 2 ® Parts List Top Down Mount Quick Connect VESA Plate 2x Cable Cap 1x M8 x 95mm SCHS 1x 8524 114808 114810 716061 Forearm Cap 1x M4 x 12mm Phillips Pan Head Screw 8x 3mm Allen Wrench 1x Spacer 1x 115864 701153 701313...
- Page 3 ® DESK CLAMP CONFIGURATION Tighten to 60 in-lbs (6.8 N m) 7/32" minimum Desk thickness Desk thickness up to 1.5" (3.8 cm) up to 1.5" (3.8 cm) If the monitor arm or pole does not easily fit into the mount, remove the bushing from the mount and place it on the monitor arm or pole and press firmly back into the mount.
- Page 4 ® THRU-DESK CONFIGURATION Tighten to Desk thickness 7/32" 60 in-lbs (6.8 N m) up to 1.5" (3.8 cm) minimum 7/32" Page 4 of 12 P/N 1439128001 158043 Rev B...
- Page 5 ® Tighten to 3/32" 5 in-lbs (0.6 N m) minimum Page 5 of 12 P/N 1439128001 158043 Rev B...
- Page 6 ® Page 6 of 12 P/N 1439128001 158043 Rev B...
-
Page 7: Level Adjustment
® LEVEL ADJUSTMENT Use handle to level beam. Tighten to 10 in-lbs (1.1 N m) minimum HANDLE ADJUSTMENT To adjust handle position, loosen the two set screws with the 3mm Allen wrench, adjust handle then retighten screws. Page 7 of 12 P/N 1439128001 158043 Rev B... - Page 8 ® Page 8 of 12 P/N 1439128001 158043 Rev B...
- Page 9 ® Page 9 of 12 P/N 1439128001 158043 Rev B...
- Page 10 ® TILTER FRICTION ADJUSTMENT 1/8" Page 10 of 12 P/N 1439128001 158043 Rev B...
- Page 11 ® IMPORTANT! • Monitor must be on arm • Arm must be in mount Press the arm down to approximately parallel OPTIONAL ADJUSTMENT with the desk prior to turning the strength adjustment screw. 7/32" 1/8" In some instances, an additional counterbalance adjustment may be needed to allow the arm’s instant height adjustment function to work properly.
- Page 12 ® Page 12 of 12 P/N 1439128001 158043 Rev B...
Need help?
Do you have a question about the CFSTDDUALBAR and is the answer not in the manual?
Questions and answers