Steelcase RoomWizard Installation Instructions Manual page 12

VIA Glass (continued)
4. Peel adhesive backing film from the
adhesive mounting strip on the back of
the glass mounting bracket. Ensuring the
glass mounting bracket is level and against
the VIA frame, press the glass mounting
bracket onto glass. Hold firm, even
pressure for at least 15 seconds.
5. Plug the PoE cable into the back of the
RoomWizard.
6. Attach the RoomWizard to the glass
mount bracket. If possible, push any
excess cable back into the wall frame.
7. Peel or cut tabs on the protective cover,
then slide to remove the protective cover.
8. Insert PoE cable cover into mount bracket
and over the PoE Cable.
4
REMOVE BACKING FILM
FROM ADHESIVE STRIP
5
Peel or cut the tabs on the
protective cover
RoomWizard
Installation Instructions
6
7
8
PoE Cable Cover
Mounting Kits
©
Extra cable and cover can be
managed by filling opening.
Page 12 of 20