VIA Glass
1. Temporarily locate the glass mount bracket
onto extrusion. The glass mounting bracket
should be centered 52" (132cm) from the floor.
2. Thoroughly clean an area at least as large as the
mounting bracket using the alcohol wipe
provided. Allow to completely dry
(approximately 20 seconds) before attaching
mount bracket. Removal of any vinyl applique is
required, vinyl must be cut to a 3-3/8" x 7-1/4"
(8.5cm x 18.5cm) rectangle. Glass must be
clean, free of any residue and dry from any
previous application used.
3. Route the PoE cable through the glass mounting
bracket.
3
RoomWizard
7.5" (19cm)
52"
(132cm)
TO FLOOR
Mounting Kits
©
Installation Instructions
Page 11 of 20
52"
(132cm)
to Floor