Sun Microsystems SPARCstation 20 Service Manual page 20

TABLE P-1
Part Number/Title
Part 3, "Preparing for
Service"
Part 4, "Subassembly
Removal and
Replacement"
Part 5, "System Board"
Part 6, "Illustrated Parts
Breakdown"
Part 7, "Appendixes,
Glossary, and Index"
Warnings and Cautions
Caution – This equipment contains lethal voltage. Accidental contact can result in
serious injury or death.
xx SPARCstation 20 Service Manual • July 1996
Document Organization (Continued)
Chapter Number/Title
Chapter 5, "Safety and Tool
Requirements"
Chapter 6, "Power On and Off"
Chapter 7, "Internal Access"
Chapter 8, "Removing and
Installing Subassemblies"
Chapter 9, "Storage Devices"
Chapter 10, "System Board
Overview"
Chapter 11, "System Board and
Component Replacement"
Chapter 12, "Illustrated Parts
Breakdown"
Appendix A, B, and C
Glossary
Index
Description
Explains how to work safely when servicing
the SPARCstation 20 system
Provides step-by-step procedures to power
on and power off the SPARCstation 20
system
Provides step-by-step procedures to remove
the SPARCstation 20 system cover, attach the
wrist strap, and replace the cover
Provides step-by-step procedures to remove
and install major subassemblies
Provides step-by-step procedures to remove
and replace storage devices
Provides system board description and
damage prevention; identifies replaceable
system board components
Provides step-by-step procedures to remove
and replace the system board, and to remove
and replace various components associated
with system board operation
Lists replaceable parts for the SPARCstation
20 system
Provides physical, electrical, and
environmental specifications, a functional
description of the SPARCstation 20 system,
connector pinouts and signal descriptions,
and information on SCSI targeting
Provides a listing of acronyms, terms, and
definitions
Provides a quick reference to specific topics