Power-Off; Module-Info - Sun Microsystems SPARCstation 20 Service Manual

Example:
ok setenv selftest-#megs XX

power-off

The power-off command turns off the system power. A Type-5 keyboard must be
attached for this command to work.

module-info

The module-info command is used to display the installed MBus module type and
MBus module and SBus card clock speeds. If multiple MBus modules are installed,
the module-info command identifies each module individually.
identifies the module-info command output message for a uniprocessor.
CODE EXAMPLE E-10
multiprocessor.
CODE EXAMPLE E-9
ok module-info
MBus: 40.00 MHz
SBus: 20.00 MHz
CPU#0: 50.00 MHz SuperSPARC/SuperCache
CODE EXAMPLE E-10
<#0> ok module-info
MBus: 50.00 MHz
SBus: 25.00 MHz
CPU#0: 50.00 MHz SuperSPARC
CPU#2: 50.00 MHz SuperSPARC
228 SPARCstation 20 Service Manual • July 1996
identifies the module-info command output message for
Uniprocessor module-info Command Output Message
Multiprocessor module-info Command Output Message
CODE EXAMPLE E-9