Figure 8-10 Disconnecting The Fan Dc Power Connector - Sun Microsystems SPARCstation 20 Service Manual

b. Place the tip of a small flat-blade screwdriver under the fan side mounting clip
and pry it up to free the fan clip from the chassis metal drive bracket.
c. While prying the clip up, pull the fan housing toward the center of the system
to free the bottom clip from the chassis (
d. Set the fan aside.
Note: Cable restraints and SCSI data
cables are not illustrated.
FIGURE 8-10
68 SPARCstation 20 Service Manual • July 1996
Fan DC power connector
Front
Disconnecting the Fan DC Power Connector
).
FIGURE 8-11
Right side