Location Of The Ethernet Adapter Filler Panel On The Chassis - IBM Storwize V7000 Unified Series Problem Determination Manual

Figure 13. Location of the rubber stopper on the chassis
Ethernet adapter
filler panel
Rubber
stopper
Figure 14. Location of the Ethernet adapter filler panel on the chassis
108
Storwize V7000 Unified: Problem Determination Guide Version
Rubber
stopper
Rubber
stopper
Ethernet
adapter connector
5. Remove the Ethernet adapter filler panel on the rear of the chassis (if it has
not been removed already). See Figure 14.
Standoff
6. Install the two standoffs on the system board.
7. Insert the bottom tabs of the metal clip into the port openings from outside
the chassis. See Figure 15 on page 109.