Tape-Enabled Server Model - IBM Storwize V7000 Unified Series Problem Determination Manual

SAS controller
SAS riser card
Figure 19. 16-drive-capable server model
3. To remove the SAS riser-card and controller assembly for a tape-enabled server
Release latch
Pins
SAS riser card
Figure 20. Tape-enabled server model
112
Storwize V7000 Unified: Problem Determination Guide Version
Release tab
a. Press the release tab toward the rear of the server and lift the back end of
the SAS controller card slightly.
b. Place your fingers underneath the upper portion of the SAS riser card and
lift the assembly from the system board.
c. Slide the front end of the SAS controller card out of the retention bracket
and lift the assembly out of the server.
model, complete the following steps.
Figure 20 shows the SAS riser card in the tape-enabled server model.
Slots
a. Press down on the assembly release latch and lift up on the tab to release
the SAS controller assembly, which includes the SAS riser card, from the
system board.