Tier 1 Cru At Your "Installing The Battery - IBM Storwize V7000 Unified Series Problem Determination Manual

Installing the battery
The following procedure is for a Tier 1 customer replaceable unit (CRU).
Replacement of Tier 1 CRUs is your responsibility. If IBM installs a Tier 1 CRU at
your request, you will be charged for the installation. Service agreements can be
purchased so that you can ask IBM to replace these units.
Note: Before running a procedure, refer to "Removing a file module to perform a
maintenance action" on page 51.
The following notes describe information to consider when replacing the battery in
the file module.
v You must replace the battery with a lithium battery of the same type from the
same manufacturer.
v After you replace the battery, you must reconfigure the file module and reset the
system date and time.
v To avoid possible danger, read and follow the following safety statement.
v To order replacement batteries, call 1-800-IBM-SERV within the United States,
and 1-800-465-7999 or 1-800-465-6666 within Canada. Outside the U.S. and
Canada, call your support center or business partner.
Statement 2
CAUTION:
When replacing the lithium battery, use only IBM Part Number 33F8354 or an
equivalent type battery recommended by the manufacturer. If your system has a
module containing a lithium battery, replace it only with the same module type
made by the same manufacturer. The battery contains lithium and can explode if
not properly used, handled, or disposed of.
Do not:
v Throw or immerse into water
v Heat to more than 100°C (212°F)
v Repair or disassemble
Dispose of the battery as required by local ordinances or regulations.
See "Battery return program" on page 87 for more information. Dispose of the
battery as required by local ordinances or regulations.
To install the replacement battery, complete the following steps:
1. To help you work safely with Storwize V7000 Unified file modules, read the
safety information in "Safety" on page xi, "Safety statements" on page xiii, and
"Installation guidelines" on page 54.
2. Follow any special handling and installation instructions that come with the
replacement battery.
3. Insert the new battery:
a. Tilt the battery so that you can insert it into the socket on the side opposite
the battery clip.
89
Chapter 4. File module