Connecting The Remote Battery Cable; Locating The Posts On The Battery And Battery; Removing A Cd-Rw/Dvd Drive - IBM Storwize V7000 Unified Series Problem Determination Manual

Remote battery
cable connector
Figure 35. Connecting the remote battery cable
3. On the remote battery tray, find the pattern of recessed rings that matches the
Battery
retention clip
Posts
Rings
Figure 36. Locating the posts on the battery and battery carrier
4. Press the posts into the rings and underneath the tabs on the remote battery
5. Secure the battery to the tray with the battery retention clip.
6. Install the cover, as described in Installing the cover.

Removing a CD-RW/DVD drive

The following procedure is for a Tier 1 customer replaceable unit (CRU).
Replacement of Tier 1 CRUs is your responsibility. If IBM installs a Tier 1 CRU at
your request, you will be charged for the installation. Service agreements can be
purchased so that you can ask IBM to replace these units.
Remote battery cable
posts on the battery and battery carrier. See Figure 36.
Battery
Battery
tray
Post
tray.
127
Chapter 4. File module