Display Position Adjustment - Barco MDRC-1219 HB User Manual

Image 2-5
MDRC-1219 and MDRC-1219 TS
Image 2-6
MDRC-1219 HB and MDRC-1219 HB TS
4. If necessary for your application, earth the MDRC-1219 by connecting the earth pin to a grounded
outlet by means of a yellow/green AWG18 wire (maximum admitted cable length according to national
regulation requirements).
Image 2-7
MDRC-1219 and MDRC-1219 TS
Image 2-8
MDRC-1219 HB and MDRC-1219 HB TS
5. Route all cables through the provided cable routing clip at the back of the display stand.
2.2

Display position adjustment

To adjust the display position
You can safely tilt, pivot, raise and lower the display as desired.
K5902137 (451920612603) MDRC-1219 23/02/2018
2. Installation
9