Table of Contents
Advertisement
Gen II PowerGlide Plus Wiring Kit (P/N 117-5130-001)
TABLE 5.
Picture
Not Pictured
Important:
In addition to the Gen II wiring kit components listed above, an implement extension tee cable is
required for the operation of the PowerGlide Plus AutoBoom system. For available cables and ordering
information, contact your local Raven dealer.
Install the PowerGlide Plus Hydraulic System
Manual No. 016-0230-014
Item Description
Manual - AutoBoom Calibration & Operation
Node - PowerGlide Plus AutoBoom
Cable - PowerGlide Plus/UltraGlide with
CAN/Power Tee AutoBoom
The machine must remain stationary and
switched off, with the booms unfolded and
supported, during installation or maintenance.
When installing AutoBoom hydraulics or
performing diagnostics, maintenance, or routine
service, ensure precautions are taken to
prevent any foreign material from being
introduced into the machine's hydraulic system.
Objects or materials that are able to bypass the
machine's hydraulic filtration system will reduce
performance and possibly cause damage to the
AutoBoom hydraulic valve.
Part Number
016-0130-062
063-0130-010
115-0230-085
WARNING
CAUTION
PowerGlide Plus
Qty.
1
1
1
29
Advertisement
Table of Contents
