Overview / Type / Compliance / Warnings / Precautions / Wiring / Plugs - Page 1 Of 2 - Structural Concepts HARMONY HMO2653R Installation And Operating Manual

OVERVIEW / TYPE / COMPLIANCE / WARNINGS / PRECAUTIONS / WIRING / PLUGS - PAGE 1 of 2

OVERVIEW

These Structural Concepts Harmony® self-service
cases are designed to merchandise packaged
products at 41 °F (5 °C) or less product temperatures
(unless custom cases with wire rack shelving).

Cases should be installed and operated according to
this operating manual's instructions to ensure proper
performance.

Improper use will void warranty.
TYPE 1 vs. TYPE 2 CONDITIONS
This unit is designed for the display of products in ambient
store conditions where temperatures and humidity are
maintained within a specific range.

For Type 1 Conditions (most cases): ambient
conditions are to be at 55% maximum humidity and
maximum temperatures of 75 °F (24 °C).
WARNING
ELECTRICAL
HAZARD
WARNING
KEEP
HANDS
CLEAR
WARNING
HOT
SURFACE
This equipment MUST be installed in compliance with
all applicable NEC, federal, state and local
electrical and plumbing codes.
Risk of electric shock. Disconnect power before servicing unit.
CAUTION! More than one source of electrical supply is
employed with units that have separate circuits.
Disconnect ALL ELECTRICAL SOURCES before servicing.
Hazardous moving parts. Do not operate unit with covers removed.
Fan blades may be exposed when deck panel is removed.
Disconnect power before removing deck panel.
Electric coil condensate pans are hot!
Disconnect and allow to cool
before cleaning or removing from case.
WARNING: This product can expose you to chemicals, including
Urethane (Ethyl Carbamate), which are known to the state of
California to cause cancer and birth defects or other reproductive
harm. For more information go to P65Warnings.ca.gov.
4

For Type 2 Conditions: ambient conditions are to be at
55% maximum humidity and maximum temperatures
of 80 °F (27 °C).

If unsure if unit is designed for Type 1 or 2, see tag
next to serial label. See SERIAL LABEL LOCATION &
INFORMATION LISTED / TECH INFO & SERVICE
section in this manual for sample serial labels.
COMPLIANCE

Performance issues when in violation of applicable
NEC, federal, state and local electrical and plumbing
codes are not covered by warranty.

See below compliance guideline.
WARNINGS

This page contains important warnings to prevent
injury or death. Please read carefully!
COMPLIANCE
WARNING
WARNING
WARNING