Table of Contents
Advertisement
espresso coffee machines
5.4 SETTING NEW OPERATING TEMPERATURE PARAMETERS
Hold down the button
remain lit while the other symbols will switch off.
Use the buttons
(i) or
Press the button (h) to quit the programming function.
Take note!
The boiler pressure (operating temperature) is usually modified exclusively in order to adapt the machine temperature to the
type of coffee blend used, so as to improve the result in the cup.
5.5 ELECTRIC CUP WARMER (optional)
Press the cup warmer operating button (l) and check its operating status through the lighting up of the LED (d) on the control panel.
To switch it off, press the same button.
5.6 TEMPORARY TEMPERATURE INCREASE FUNCTION
When the machine is operated in conditions which may considerably reduce its temperature, the boiler temperature can be increased
by 2°C by pressing the (i) button for approximately 2 seconds; by doing this, the programmed SET temperature keeps blinking and at
the same time the temperature symbol, 2°C higher with respect to the programmed SET, starts blinking as well (e.g. if the SET is 120°C,
it blinks and keeps blinking, while the 122°C SET starts blinking as well).
The new SET will follow the temperature trend, flashing when the appliance is heating up and fixed when the set temperature has been
reached.
To return to the initial status, press the button (g) for about 5 seconds.
LSI 089 - Rev. 00 - Ed. 04/2015
(h) on the programming panel for 5 seconds; the symbol on the control panel for the set temperature will
(g) to change the setting.
8
9
-
25
Hide quick links:
Advertisement
Table of Contents
