espresso coffee machines
5.5 ELECTRIC CUP WARMER (optional)
In the models equipped with the electric cup warmer, to activate it, move the main switch button from position 1 (standard operation of
the machine) to position 2. To deactivate it, move it back to position 1.
5.6 INDIVIDUAL TEMPERATURE CONTROL - I.T.C. - (optional)
This system makes it possible to set a different coffee brewing temperature for each
delivery group.
The temperature of each group is independent from the temperature set in the
boiler.
To vary the temperature on a group, use the corresponding regulator alongside the group
itself, which can be reached through the opening in the top of the, upper cup grid (1) (Fig.
35).
Turn the adjustment screw anticlockwise to decrease the temperature.
Turn the adjustment screw clockwise to increase the temperature.
Take note!
Every full turn of the adjustment screw corresponds to a change of approximately 2 °C.
Changes must only be made to adapt the temperature of the delivery group to the coffee blend being used, so as to improve
the result in the cup.
LSI 089 - Rev. 00 - Ed. 04/2015
8
-
Temperature
regulator
9
Fig. 35
47