Switching On The Machine; Filling The Boiler; Switching On The Appliance - La Spaziale S8 Series Installation Instructions Manual

8 9
-

5. SWITCHING ON THE MACHINE

5.1 FILLING THE BOILER

A. Open the water supply tap as arranged during the preparatory stages (See Fig. 12 on page 20).
B. Verify that the water mains pressure (approx. 4 bar) is visualized on the water mains pressure gauge (14).
C. Push the manual filling valve on the appliance (it is placed below the water drip tray) until the boiler level indicator is halfway (16).

5.2 SWITCHING ON THE APPLIANCE

A. Turn on the power supply switch that was prearranged during the system preparation (see Fig. 11 page 18 – Ref. 1), and then turn
on the machine's main switch (12).
Once the machine is switched on, all the symbols of touchpads are on.
Take note!
According to the amount of water filled manually, it is possible to activate the automatic refill system when the switch (12) is
turned on, until the boiler water level indicated by the manufacturer is reached.
44
espresso coffee machines
LSI 089 - Rev. 00 - Ed. 04/2015