Individual Temperature Control - I.t.c. - (Optional); Cash Register Connection - La Spaziale S8 Series Installation Instructions Manual

espresso coffee machines

5.12 INDIVIDUAL TEMPERATURE CONTROL - I.T.C. - (optional)

This system makes it possible to set a different coffee brewing temperature for each de-
livery group.
The temperature of each group is independent from the temperature set in the boiler.
To vary the temperature on a group, use the corresponding regulator alongside the group it-
self, which can be reached through the opening in the top of the, upper cup grid (1) (Fig. 14).
Turn the adjustment screw anticlockwise to decrease the temperature.
Turn the adjustment screw clockwise to increase the temperature.
Take note!
Every full turn of the adjustment screw corresponds to a change of approximately
2 °C.
Changes must only be made to adapt the temperature of the delivery group to the
coffee blend being used, so as to improve the result in the cup.

5.13 CASH REGISTER CONNECTION

The appliance can be connected with the cash register by a 32 relays interface.
For further information about this system, contact La Spaziale S.p.A..
Take note!
If the appliance is set to be connected to the cash register but the interface is not connected, each time that a doses button is
pressed, the corresponding symbol is blinking and the water doesn't come out to the group head.
LSI 089 - Rev. 00 - Ed. 04/2015
8
-
Temperature
regulator
9
Fig. 14
31