Coffee Brewing; Hot Water Delivery For Infusions - La Spaziale S1 Vivaldi Manual For Use And Maintenance

2.2

COFFEE BREWING

1. Unfasten the filterholder (11) from the brewing group (10) and insert the filter for one or two cups.
2. Fill it with ground coffee, (using the coffee doser provided) making sure not to leave coffee powder on
the upper edge of the filterholder (11), and press it with the suitable coffee tamper provided.
3. Firmly attach the filterholder (11) to the brewing group (10).
4. Place one or two cups below the filterholder (11)
5. Press the button corresponding to one cup (24) if you want to make one coffee or two cups (25) to start
the delivery. Once the desired quantity of coffee programmed is reached, the delivery automatically
stops.
N.B. If you want to stop in advance the delivery, which was started with one of the buttons with
preset doses, it is enough to press the same button again.
WARNING!!!
While the machine is in operation, check frequently the filling level of the drip-tray (1) and, if necessary,
proceed and empty it out.
2.3 TAKING HOT WATER FOR INFUSIONS
(only possible with the boiler turned on, light 13 turned on)
1. Place the pitcher below the hot water output (28).
2. Press the hot water delivery push-button (23).
3. The hot water delivery starts (at this stage the pump is working).
4. Once the desired quantity is reached, stop the delivery by pressing the same button (23).
8
LSC 008 REV. 01
MANUAL FOR USE AND MAINTENANCE