Fast Function Key - ITech IT8300 Series User Manual

Detailed description of keys:
Keys
Shift
Local
0~9
.
Esc
CC
CV
CR
CW
Enter
On/Off

2.4 Fast function key

A combination of front panel keys and [Shift] composition keys in IT8300
Series can realize functions marked at key bottom. For details, see table below.
Keys
Shift +1 (Short)
Shift +2 (Tran)
Shift +3 (List)
Shift +4 (Save)
Shift +5 (Battery)
Shift +6 (Prog)
Shift +7 (Info)
Shift +8 (System)
Shift +9 (Config)
Shift +0 (Pause)
Shift + . (Trigger)
Shift + CC (OCP)
Shift + CV (Setup)
Name and functions
Composite key.
Local key, to shift local and remote operation.
0 -9 are numeric keys.
Dot.
Esc key, to exit at any working status.
To select constant current mode and set current input value.
To select constant voltage mode and set voltage input value.
To select constant resistance mode and set resistance input value.
To select constant power mode and set constant power input value.
Enter key.
To control input status of load: on/off.
Up/Down key, to select menu items during menu operation.
Left/Right key, to adjust the cursor to the specified location to set the
value.
Function introduction
To start or end short circuit test.
To set dynamic operation parameters.
To set list operation function.
To save existing setting load parameter values, e.g.,
voltage, current and power.
To operate battery test function.
To operate auto test function.
To display model, version number and serial number
of electronic load.
To set system menu.
To configure system menu.
To pause operation during automatic test.
Trigger key, to start up triggering functions.
To operate OCP test function.
To set specific parameters of constant voltage,
constant current, constant resistance and constant
power.
Copyright © ITECH Electronics Co., Ltd.
Quick Start
3