Connecting The Power Cord - ITech IT8300 Series User Manual

1.3 Connecting the Power Cord

Before connect
To avoid buring out and electric shock, The safety precautions must be
observed.

To avoid burning out, be sure to confirm that the power voltage matches with
the supply voltage.

please ensure the power switch of the instrument is turned OFF.

To avoid burning out and electric shock, please only use the power cord
supplied as a standard accessory.

Be sure to connect the main power socket to the power outlet with protective
grounding. Do not use terminal board without protective grounding.

Do not use an extended power cord without protective grounding, otherwise
the protection function will fail.

Be sure to perform related operations and connections to feed energy back to
grid in accordance with related regulations, and meet all necessary conditions.
Connecting the Power Cord
The IT8300 series electronic load AC input needs to connect to the three-phase
power supply with protective grounding.
1. Please ensure the power switch of the instrument is turned OFF.
2. Remove the protective covers.
3. Connect one end of the AC power cord to the AC input terminals in the rear
panel of the electronic load.
4. Connect the other end of the power cord to the AC distribution panel that
meets the requirements in the "Output parameter" column of the
specifications.
Copyright © ITECH Electronics Co., Ltd.
Inspection and Installation
6