Table of Contents
Advertisement
ITEM NO.
PART NO.
77
05-623
78
06-369
79
05-162
80
800-1110
81
4-409
Visit srsmith.com for hardware kit and replacement part information.
VORTEX WARNING SIGN ASSEMBLY INSTRUCTIONS
1. Find a location within 2'-0" of the entrance to the slide to mount the warning sign. The warning sign
must face away from the entrance in a manner that it is visible at least 10'-0" from the slide entrance.
2. Use the Deck Flange (77) as a template to mark the location of the warning sign anchors.
3. Move the sign aside, and drill 5/16"Ø x 3" deep holes into the deck.
4. Move the sign back into place and install the concrete anchors in accordance with the instructions on
page 41.
The following hardware is required for mounting the Warning Sign (78) anchors: 5/16"Ø x 2-3/4"
Concrete Anchors (79) and a 5/16"Ø Lock Washer (80). See Figure DD for order of assembly.
VORTEX WARNING SIGN PARTS LIST
SLIDE LARGE DECK FLANGE WITH HARDWARE
VORTEX SLIDE RULES SIGN (NOT SHOWN)
5/16"x 2-3/4" CONCRETE ANCHOR WITH HARDWARE
5/16" LOCK WASHER
VORTEX WARNING SIGN POST
FIGURE DD
36
DESCRIPTION
QTY.
1 ea.
1 ea.
4 ea.
1 ea.
1 ea.
Advertisement
Table of Contents
