ADULT AT ALL TIMES WHEN USING THE SLIDE. INTENDED USE INSTRUCTIONS THE ROGUE2 SLIDE IS DESIGNED AND MANUFACTURED FOR INSTALLATION AND USE ON INGROUND SWIMMING POOLS ONLY. DO NOT INSTALL THE ROGUE2 SLIDE ON ABOVE GROUND POOLS, HOUSEBOATS, BOAT DOCKS, FLOATING DOCKS OR PLATFORMS, OR OTHER BODIES OF WATER SUCH AS LAKES, PONDS, RIVERS, ETC.
Figure 1 INSTALLED ROGUE2 STRUCTURAL & INSTALLATION CHECKLIST After installation and prior to the first use of the ROGUE2 and periodically (see DAILY/WEEKLY MAINTENANCE OF THE ROGUE2) thereafter the owner must: 1. INSPECT THE RUNWAY FOR VISIBLE CRACKS OR TEARS.
DAILY/WEEKLY MAINTENANCE OF THE ROGUE2 1. When hosing down the deck, hose your Rogue2 to wash away any dust, dirt or other debris, which may have accumulated. 2. Be sure that all connections are secure. Tighten hardware if necessary. 3. All polyethylene parts require little maintenance. Hose and wipe to clean.
MANUFACTURER’S PLACEMENT INSTRUCTIONS THE SLIDE OWNER MUST REVIEW THE MANUFACTURER’S PLACEMENT INSTRUCTIONS WITH THE INSTALLER TO ENSURE THAT THE MANUFACTURER’S INSTALLATION REQUIREMENTS HAVE BEEN MET. PROPER ASSEMBLY, INSTALLATION, USE AND SUPERVISION IS ESSENTIAL FOR PROPER OPERATION AND TO REDUCE THE RISK OF SERIOUS INJURY OR DEATH. 1.
Page 7
3. SLIDE PLACEMENT INSTRUCTIONS FOR INSTALLATIONS ON POOLS WITH OTHER SLIDES AND/OR DIVING BOARDS A. The minimum clearance area in front of a properly installed diving board on an inground swimming pool is a minimum distance of 3’-6” (1067 mm) on either side of the board’s centerline as shown in FIGURE 4.
Windex® With Vinegar White Cap® Ajax® Liquid Serious Equipment, Serious Fun! Product Name: Rogue2 Serial Number: ___________________ (located on label attached to slide) Purchase Date:____________________ To register your slide and find information on the full line of S.R. Smith deck equipment please visit www.srsmith.com.