11. Move the Middle Stair Support (62) into place as shown in Figure T. Align the holes in the Middle
Stair Support bracket with the holes in the stair brackets.
12. Attach both sides of the Middle Stair Support to the stair brackets as shown in Figure T. The required
hardware is as follows: 1/2" x 1-1/2" Hex Head Bolt (44), 1/2" Flat Washer (15), 1/2" Nylon Washer
(19), 1/2" Nylon Washer (19), 1/2" Flat Washer (15), 1/2" Lock Washer (16), 1/2" Hex Nut (17).
13. Add another set of side brackets and use the same hardware as shown in Figure S to fasten them.
Note: Be sure to apply anti-seize to all fasteners to prevent galling.
FIGURE T
26