Remove locking pin (arrow) 4130 893 7800.
N
Pull off the belt pulley (6).
N
6.5
Installing the front belt pulley
Push on the belt pulley (6).
N
Block belt pulley (6) with locking pin (arrow)
N
4130 893 7800.
Slide on the washer (5).
N
Screw on and tighten nut (4) (40 Nm / 354 lbf. in.) for
N
pre-tensioning (left-hand thread).
Unscrew the nut (4) (left-hand thread).
N
Coat thread of the shaft with thread-locking adhesive.
N
Screw on and tighten nut (4) (40 Nm / 354 lbf. in.)
N
(Left-hand thread)
Remove locking pin (arrow) 4130 893 7800.
N
Install the front V belt, @ 4.5.
N
Install the rear V belt, @ 4.3.
N
Attach starter cover with rewind starter, @ 4.3.
N
Fit guard, @ 4.3.
N
TS 440
6
5
4
11