Electromagnet; Tools, Aids; Removing The Electromagnet - Stihl TS 440 Service Manual

13 Electromagnet

P6x19 (6 Nm / 53 lbf. in.)
13.1

Tools, aids

Socket T27x125 – 0812 542 2104 or equivalent tool
–
Torque wrench – 5910 890 0302 or equivalent tool
–
Torque wrench – 5910 890 0312 or equivalent tool
–
Screwdriver T27x200 – 5910 890 2415 or equivalent
–
tool
Wiring tool - 5910 890 4000
–
Socket 13 mm – 5910 893 5608 or equivalent tool
–
Flex ratchet wrench
–
Extension for flex ratchet wrench
–
Loctite 242 (thread-locking adhesive, medium
–
strength) – 0786 111 2101
13.2

Removing the electromagnet

Prepare for repair, @ 3.1
N
Remove guard, @ 4.2.
N
Remove "starter cover with rewind starter", @ 4.2.
N
Remove the rear V belt, @ 4.2.
N
Remove the front V belt, @ 4.4.
N
Remove the middle belt pulley, @ 6.2.
N
Undo nut (2).
N
Remove screws (1).
N
Remove the holding-down clamp (3).
N
Undo screw (4).
N
32
4
8
7
6
D4x18
(3,5 Nm /
31 lbf. in.)
3
5
5
Release cover (5) at the tab (arrow) and remove it.
N
10
9
Pull out white plug (9).
N
Pull grommets (10) out of the guides.
N
Pull wire of electromagnet out of the guide.
N
1
D4x12 (3,5Nm /
31 lbf. in.)
2
M8
(20 Nm / 177 lbf. in.)
10
TS 440