Removing The Connector, Brake Band And Brake Lever - Stihl TS 440 Service Manual

10.4 Removing the connector, brake band and brake le-
ver
11
10
P6x19 (6 Nm / 53 lbf. in.)
Release hose clip (8) on water connector.
N
Pull off hose (9) and hose clip (8).
N
Undo screw (10).
N
11
Release cover (11) at the tab (arrow) and remove it.
N
20
7
8
N
N
N
N
N
N
N
N
13
9
14
15
12
M8 (20 Nm / 177 lbf. in.)
17
16
Pull out white plug (16).
Pull grommet (17) out of the support (arrow)
Undo the nuts (12).
Actuate top brake lever (7) and hold it there.
Remove connector (13) and attached parts.
Slowly release top brake lever (7).
Remove screws (15).
Remove the holding-down clamp (14).
D4x12 (3,5 Nm / 31 lbf. in.)
TS 440