8.3
Installing the brake band
4
Actuate the brake lever (5) and hold it there.
N
Hook brake band (4) onto the lever (6).
N
Insert brake band (4) into guide (arrow).
N
Slowly release brake lever (5).
N
4
Insert brake band (4) and press it into the
N
support (arrow).
Coat thread of screw (3) with thread-locking
N
adhesive.
Insert screw (3) and tighten.
N
Insert holding-down clamp (2).
N
Insert screws (1) and tighten.
N
Install connector, @ 7.3.
N
Install the rear V belt, @ 4.3.
N
Install "starter cover with rewind starter", @ 4.3.
N
Fit guard, @ 4.3.
N
TS 440
6
15