Table of Contents
Advertisement
Application planning
4.3 Unpacking and checking the delivery
Table 4- 1
Type of Condition
Temperature
Maximum temperature increase
Relative atmospheric humidity
Moisture condensation and ice formation
4.3
Unpacking and checking the delivery
Procedure
1. If you are the person receiving the goods, check the packaging for damage caused
2. If any transport damage is present at the time of delivery, lodge a complaint at the
3. Unpack the device.
4. Keep the packaging material in case you have to transport the unit again.
5. Please keep the enclosed documentation in a safe place. You will need the
6. Check the package contents for completeness and any visible transport damage. Check
7. Notify the delivery service in charge immediately if the packages contents are incomplete
80
Shipping and storage conditions
during transport.
shipping company in charge. Have the shipper confirm the transport damage
immediately.
CAUTION
Do not lie the device on its back. This will avoid any damage to an optical drive which
may be present.
NOTICE
The packaging protects the device during transport and storage. Transport the device
only in the original packaging!
documentation when you start up the device for the first time.
for completeness using the enclosed "Contents of Delivery" list.
or damaged.
WARNING
Make sure that a damaged device is not installed nor put into operation.
Permissible range
– 20 °C to 60 °C
10 K/h
5 to 95% (at 25 °C)
Not permissible
SIMOTION P350-3 and Panels
Manual, 05/2009
Advertisement
Table of Contents
