7-Segment Display - Siemens SIMOTION P350-3 Manual

Hardware description
3.2 SIMOTION P350-3 PC unit
3.2.5

7-segment display

The status display consists of two 7-segment displays with two 2-color LEDs.
Table 3- 1 Meaning of the 7-segment displays and LEDs
LED H1
LED H2
(next to the box label)
7-segment display 1
7-segment display 2
(next to the box label)
See also the SIMOTION P350-3 and Panel Fronts Commissioning Manual.
38
SIMOTION operation
no use assigned
SIMOTION status
Green flashing - RUN
•
SIMOTION P has started up and is in
RUN mode.
Orange flashing - STOP
•
SIMOTION P has started up and is in
STOP mode.
Red flashing/red continuous light
•
- internal status
Not currently used
(preassigned with "0")
SIMOTION status (operating status display
for SIMOTION P state)
6 - RUNNING
•
SIMOTION P has started up and the
cyclic tasks are activated.
0 to 5, a to f - internal status
•
(1) LED H2
(2) LED H1
(3) 2 x 7-segment display
Meaning
BIOS powering up
The two LEDs light up in two colors (red and
green) in order to test their operation. The two
LEDs switch off when the startup is completed
without errors.
The POST codes of the associated test step and
of the operating mode are displayed. The POST
code of the most recently started test step is
displayed when an error occurs. Code 00 is
displayed when the startup is completed without
error.
SIMOTION P350-3 and Panels
Manual, 05/2009