Table of Contents
Advertisement
3.5.4
Slots for the MCI-PN board
Possible slots
The slot for the MCI-PN board is determined by the SIMOTION P350-3 equipment.
● If the MCI-PN board is being used as an option together with the IsoPROFIBUS board,
● In the case of a PROFINET-only solution, the MCI-PN board is always connected to
The above slot rules are fixed and must always be observed. If you do not follow the slot
rules, real-time capability problems (latency) can occur in SIMOTION P350-3.
3.5.5
Technical data for the MCI-PN board
Table 3- 14
Technical data
Data transfer
Data transmission rate
Interfaces
Connection to 10BaseT/100BaseTx
Connection to programming device/PC
Voltage
PCI power supply
Current consumption
Current consumption for PCI voltage + 5 V
Permissible ambient conditions
Temperature
•
Tested according to
Relative atmospheric humidity
•
Tested according to
Temperature change
Moisture condensation and ice formation
SIMOTION P350-3 and Panels
Manual, 05/2009
the modules are plugged in as follows:
– IsoPROFIBUS always in slot 1
– MCI-PN-Board in slot 2 (directly above the motherboard)
slot 1.
Technical data for the integrated MCI-PN board
MCI-PN board in SIMOTION P
MCI-PN board in SIMOTION P
3.5 MCI-PN board for SIMOTION P350-3
10/100 Mbps (PROFINET only 100 Mbps)
RJ45 connection (4 units)
PCI slot
DC + 5 V, ± 5%
Max. 900 mA
Operation
5 °C to 45 °C
IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-14
Operation
5 % ... 80 %
IEC 60068-2-78, IEC 60068-2-30
Max. 10 K per hour in operation
Not permissible
Hardware description
Storage/transport
- 20 °C to 60 °C
Storage/transport
5 % ... 95 %
57
Advertisement
Table of Contents
