Table of Contents
Advertisement
5.3
Distributed configuration
5.3.1
Overview of decentralized structure
The decentralized structure makes it possible to connect SIMOTION panel fronts in different
physical locations to a SIMOTION P350-3. This makes for flexibility in terms of location
which enables the SIMOTION P350-3 to be positioned in non-critical areas of an installation
(e.g. control cabinet).
The essential characteristics of a Panel PC Remote Kit are as follows:
● Signal transmission between SIMOTION P350-3 and SIMOTION panel front via DVI-D
● The distance between SIMOTION P350-3 and the SIMOTION panel front can be up to
● Graphics resolutions: 800 x 600 to 1024 x 768 pixels; color resolution: 16 bits (specific to
● Interfaces on the remote module:
● External 24 V DC power supply required
Note
Using a decentralized structure with the Panel PC Remote Kit reduces the data rate at the
USB interface on the SIMOTION panel front.
See also
Accessories for the Panel PC Remote Kit (Page 75)
SIMOTION P350-3 and Panels
Manual, 05/2009
and USB or USB extender cable
30 m.
the panel front used)
– DVI-D interface
– USB computer interface (> 5 m) RJ45
– 2 x USB 2.0 for the connection of external USB devices
– USB computer interface (≤ 5 m) USB B
– Interfaces to the SIMOTION panel front:
LVDS interface (picture signals)
I/O USB interface (keys)
USB interface (for connection to front-mounted USB interface)
Installation/mounting
5.3 Distributed configuration
93
Advertisement
Table of Contents
