Preparing For Installation; Checking The Delivery Package - Siemens SINUMERIK MCU1720 Equipment Manual

If you have any further questions or are looking for particular solutions, you can contact the
Systems Engineering Plant Chemnitz directly.
7.2

Preparing for installation

7.2.1

Checking the delivery package

Procedure
1. When accepting a delivery, please check the packaging for visible transport damage.
2. If any transport damage is present at the time of delivery, lodge a complaint at the shipping
company in charge. Have the shipper confirm the transport damage immediately.
3. Unpack the device at its installation location.
4. Keep the original packaging in case you have to transport the unit again.
Note
Damage to the device during transport and storage
If a device is transported or stored without packaging, shocks, vibrations, pressure and
moisture may impact the unprotected unit. Damaged packaging indicates that ambient
conditions have already had a massive impact on the device and it may be damaged.
This may cause the device, machine or plant to malfunction.
● Keep the original packaging.
● Pack the device in the original packaging for transportation and storage.
5. Check the contents of the packaging and any accessories you may have ordered for
completeness and damage.
MCU 1720
Equipment Manual, 09/2019, A5E47437728B AB
Installation
7.2 Preparing for installation
47