Display Elements Of The Isoprofibus Board - Siemens SIMOTION P350-3 Manual

3.4.2

Display elements of the IsoPROFIBUS board

A two-colored LED (red/green) is located on each of the two interfaces on the IsoPROFIBUS
board.
These elements are used to display the communication status of the two PROFIBUS DP
interfaces.
Table 3- 5
LED (color and status)
LED - Off
Configuring the interface as slave:
Red LED - On
Red LED - flashing (0.5 Hz)
Green LED - On
Configuring the interface as master:
Red LED - On
Red LED - flashing (0.5 Hz)
Green LED - On
SIMOTION P350-3 and Panels
Manual, 05/2009
LEDs on the IsoPROFIBUS board
3.4 IsoPROFIBUS board for SIMOTION P350-3
Meaning
Interface not configured
Bus fault
Searching for baud rate
Parameterization errors
No cyclic data exchange
Cyclic data exchange
Bus fault
Bus short-circuit
Bus fault
Slaves have failed or cable broken
No fault or no interface configured
Hardware description
49