Table of Contents
Advertisement
Rear-mounted interfaces
The SIMOTION panel fronts are usually supplied with an additional metal plate containing
three cutouts for cable routing. The 2 flat cables used to connect the computing unit, and the
USB cable, have to be connected to the interfaces on the computing unit (see the
"Installation" section of the "SIMOTION P350-3 and Panel Fronts" Commissioning and
Hardware Installation Manual). Removing this metal plate reveals the rear side of the panel
front as shown in the figure.
● The USB I/O cable K1 at X1 is for all signals responsible for the connection of control
● Display cable K2
● USB cable
Figure 3-17
See also
Assembly forms overview (Page 91)
SIMOTION P350-3 and Panels
Manual, 05/2009
units in addition to the display interface.
Interfaces on rear side of panel
Hardware description
3.6 SIMOTION panel fronts
67
Advertisement
Table of Contents
