Application Planning; Overview Of Application Planning - Siemens SIMOTION P350-3 Manual

Application planning

4.1

Overview of application planning

Introduction
This section describes the first steps after unpackaging, the permitted mounting positions
and the fixation and provides general information about transportation and operation. The
section describes the necessary considerations for EMC.
Field of application
SIMOTION P350-3 is a PC platform for highly demanding tasks in PC-based automation
applications. The SIMOTION panel front is designed for local use directly on the machine,
and is installed for example as follows:
● Switchgear cabinets
● Swivel arms (booms)
● Consoles
Note
In the following, the term "switchgear cabinet" also refers to rack, mounting rack,
switchboard, operator panel and console. The term "device" is used to refer to the
SIMOTION P350-3 and its variants.
SIMOTION P350-3 and Panels
Manual, 05/2009
4
77