32
Configure Media Server 1
1
Connect a customer-supplied CAT5 straight-through cable from media server 1, port 1
(Eth0), to the customer's LAN. Refer to
Server with G600 Media
NOTE:
For security reasons, you may not be able to ping out to the customer's network. If you are
not able to, look at the LAN security settings, particularly icmp.
2
Under Security click Set LAN Security
3
If icmp is not checked, check both boxes to the left and click Set Security.
Getting Started with the Avaya™ S8700 Media
Gateway.
October 2002