3
Select "Configure all services using the wizard." and click Continue to get to the Set
Server Identities: page.
NOTE:
Most of the fields are populated with default settings. Do not change the defaults unless
the customer's network administrator requests it (refer to the filled-out job aid entitled
Pre-Installation Network Planning Forms—S8700 Media Server).
4
Fill in the fields on this and the subsequent pages:
Configure Interfaces
•
Configure LSP
•
•
Configure Switches
Set DNS/DHCP
•
•
Set Static Routes
Configure Time Server
•
Set Modem Interface
•
•
Update System
October 2002
Configure Media Server 1
29