Register The System - Avaya S8700 Installing Manual

194
Completing the Installation Administration
4 At the prompt type
Enter
community name is the community string name required by the SSG device.
5 Type almsnmpconf
entered.
6 At the prompt type
Type
7
enabled. If used, verify that alarm origination via modem is still enabled.

Register the system

Follow the existing process and procedures to register the Avaya™ S8700 Media Server.
Let customers know what the default LAN security settings are; they may want to change them
after installation. Make sure they are aware that if the following items are not set, they will not
have remote access to the media servers:
telnet—no Telnet access
•
• https—no Web access
• def-sat—no Avaya Site Administration access (on Advanced screen)
almsnmpconf -d ipaddress -c community name and press
. Where ipaddress is the trap receiver address for the SSG device and
and press
almenable -s y and press
almenable and press
Enter.
October 2002
. Verify that the correct information was
Enter
.
Enter
Verify that the SNMP alarm origination is